Holding both buttons down for 10 seconds is enough to force restart your device. There are a few possible causes for your Apple Watch That Won’t Turn On. The majority of them are fast.
Table of Contents
How to Fix It When Your Apple Watch That Won’t Turn On
You can try the steps below to fix your Apple Watch. These steps should work for all Apple Watch models and watchOS versions.
Solution 1: The digital crown will turn when you press or rotate the button
Some settings on your Apple Watch may prevent the screen from activating even when you touch it.
Open the Watch appplay & Brightness. Make sure Wake On Wrist Raising and Always On are both enabled.
Solution 2: Apple Watch bottom: Check it out
Apple Watches use induction technology to charge while seated on the charging pad. The Apple Watch can be damaged by anything attached to its bottom.
Solution 3: Verify that the charger station is connected to a wall outlet
It’s easy to forget that you need to reconnect the charger to the wall when someone unplugs it to use it.
Solution 4: Place your Apple Watch charger on the Apple Watch
Apple Watches, or any other device for that matter, will not turn on if the battery is low. Wait a few moments and see if your Apple Watch turns on after you place it on the charging puck.
You should be able to tell if this is the issue because the Apple Watch screen will display the time and the battery level in red until it has enough power to turn on.
Solution 5: Check the cable for any damage
Use the Apple Watch of someone else to verify that the charging station has power. When charging, the watch should display a lightning bolt icon on its screen.
Solution 6: Force-restart
Hold the Apple Watch crown (the dial that rotates to the side) and the small button below it simultaneously.
Keep both buttons pressed for 30 seconds.
Solution 7: turn off the Apple Watch
VoiceOver is a service for visually impaired people that includes this feature. When VoiceOver is activated, the watch will be operated via sound instead of sight.
- Tap the switch at the top of the screen in order to disable the feature.
- The screen curtain has its own toggle switch at the bottom of the screen.
Why Apple Watch That Won’t Turn On?
Battery issues are the most common cause of an Apple Watch display going dark or becoming unresponsive. If you haven’t worn the Apple Watch for the entire day and the battery is low, the first step in troubleshooting should be a force restart. If the battery is not an issue, you don’t need to wait for a watch to charge.
Apple Watch could also be experiencing a software problem, or you might have accidentally activated a mode that caused it to go dark.
Check: How To Fix Windows Update Error 0x80070643?
Apple Help Center: Apple Watch Service and Repair
FAQ
How can I charge my Apple Watch? | It is possible that your Apple Watch won’t charge because of an obstruction preventing the charger from connecting with the watch. Check your connections and make sure the watch has a good connection with the charger to fix the Apple Watch that is not charging. Check your cords and re-seat the watch on the charger. |
Why does my Apple Watch refuse to update? | It is possible that your Apple Watch won’t charge because of an obstruction preventing the charger from connecting with the watch. Check your connections and make sure the watch has a good connection with the charger to fix the Apple Watch that is not charging. Check your cords and re-seat the watch on the charger. |
Why does my Apple Watch not pair with my iPhone? | When an Apple Watch will not pair with an iPhone, it is usually due to Bluetooth or Wi-Fi issues. Make sure that the iPhone and Apple Watch are not in Aeroplane Mode and that Bluetooth is enabled. You can try rebooting your devices, checking the Wi-Fi connection, and clearing your iPhone network settings. |
1 thought on “How to Fix an Apple Watch That Won’t Turn On? {100% Fix}”